How To Repair Dazor Lamp

MNCorrado

I am getting closer and closer to setting up my workspace. Here is what am looking at for a bench lite.

http://world wide web.esslinger.com/three-bulbbenchlamp.aspx

If anyone has this type of fixture... is it possible to utilise T5 HO (high output) tubes into this fixture? Or is it good to go the fashion it is?

I would similar something good just not interruption the banking company. Any other suggestions for a lamp/fixture?

Thank you!
Jeff

Dave Coatsworth

A few years ago, later on trying several other lamps, I bought a used Dazor lamp. I've been very happy with that choice.

Dushan Grujich

A few years ago, after trying several other lamps, I bought a used Dazor lamp. I've been very happy with that choice.

I would agree with Dave. One should not be cutting on spending for the light for his bench. I take several dissimilar lamps on my benches, a Dazor with an half-dozen" loupe and a 22W round fluorescent lamp, a German Waldmann with 2x16W fluorescent tubes and very simillar Swiss Kumewa as well with 2x16W fluorescent tubes. Both Waldmann and Kumewa are with a C-clamp mountain, no demand to drill holes in the bench and are fully articulate, capable of placing head over any office of the bench.

The virtually of import thing is to take light reflected from the object of piece of work and not have any amount of light coming from the source directly into the eyes. I have seen people mount several long fluorescent tubes above their benches with no shades. They may only too turn them off and work in night, such is the event of light getting directly into the eyes, it blinds i.

Cheers

Dushan

Dushan Grujich

I have a two bulb Dazor on my bench that I bought new in 1978, and I wouldn't go with annihilation else. All I've done is replace bulbs equally needed, and information technology withal stays where put. Every bit previously mentioned, they may be more than expensive than others, only well worth the investment.
Samantha

G'24-hour interval Samantha!

Actually, Dazor is not the most expensive by whatsoever means, Waldmann lamps range from $600 to well over $k for new, and Swiss Kumewa are not a bit cheaper. Were Dazor more readily available I would have gone for them new, as it is the others were almost twice as expensive for used.

What is good near them all, the industrial quality lamps, is that they run cool barely warm to the bear on, no humming noise every bit from the inexpensive imitations and one can work by them all twenty-four hour period long with almost no centre fatigue.

2 hundred dollars for a new industrial quality lamp is a bargain.

Thanks

Dushan

Dushan Grujich

G'Solar day!

It is indeed difficult to spend hard earned cash, only, 1 should non economise with few things in life, 1 's own wellness and the tools of his own merchandise. In this case it is in regards of 1's own sight and the means to preserve it.

Of form, ownership used equipment for profession, or a hobby, is OK, but the quality should non be compromised on business relationship of saving a few dollars, it directly affects one's vision which volition degrade in time, specially if the person in question is getting old, like myself, equally also are many on this forum.

Thank you

Dushan

technitype

Incandescent (filament) lights are preferred- flourescent lights produce UV which is hard on the optics...and if you are doing lathe work, flourescent lights can produce a "strobing" result.

I'll take a seedling-blazon bench light with a reflector, and an adjustable arm, any twenty-four hours of the calendar week.

Tim Theisen

Does anyone know if the sometime Dazors meet current standards for electric grounding? By former let's say pre 1980'due south more or less.

I am working my way through 20 years of AW(C)I Horological Times and in one from the early 2000's there is a comment suggesting updating bench lighting to reduce the risk of shock.

Tim

MNCorrado

And so I finally purchased a vintage Dazor P 2324-xvi lamp. Unfortunately the people that shipped it did a poor job and the lamp bankrupt at the base where the articulating arm attaches. I recall I have a way to set up that on my own. I contacted Dazor most a possible replacement function for the broken one but I have not heard from them yet.

Since I have the base of the lamp apart I have a question nearly the argent starter/capacitor? Should I supervene upon that now so I won't take to bargain with it in the hereafter? If so what do I buy. The only marker I encounter on it is a circle with the number 49. The particular in question is in the lower left mitt of the motion-picture show.

MNCorrado

At that place is always one more thing... does anyone have a proposition on what bulbs I should employ in the P 2324-16?

MNCorrado

The price was correct as in nearly free and I only like to use older things. Possibly not the wisest all the time simply I approximate but the style I am.